WS2812b Full Color Matrix 8x32 Flexible Led Matrix Panel

WS2812b full color led panel rgb led matrix 8x32 LED Pixels WS2812B Digital Flexible LED Panel

These are awesome 8×32 individually addressable RGB matrix panels. Composed of 8 columns x 32 rows of WS2812B (WS2812/WS211 protocol) individually addressable LEDs on a flexible PCB, these panels have 256 LEDs and they can be daisy-chained to make bigger signs or panels! You can create animations, games, or even incorporate them into a fun e-textiles project. On top of all that, thanks to its flexible backing, this LED Matrix can be bent and bowed to fit onto almost any curvy surface.

These matrixes work with 5V low voltage input for power supply which needs to be able to source a good amount of current – up to 5A in most uses (5A if all LEDs are set to bright white, which is NOT recommended). Attached to each flexible LED matrix are two 3-pin JST SM connectors and two sets of bare power cables (input / output), which provide you connections for DC5V+, COM-, DAT, and GND.

Pls note that WS2812B are a bit different than the standard WS2801 ICs, these do not use separate clock and data lines.

Features:

1. Control IC SK6812/ws2812b inserted in 5050 RGB LED diode, supporting full color-change effects.

2. Black and white PCB optional.

3. It comes in one piece separated by a 3Pin JST SM connector and extra Power /Ground Wires.

4. Flexible PCB material, this matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces.

Warning:

Repeated / Over bending may significantly reduce the structural integrity of the flexible panel. It is advisable when bending it over curved surfaces to not be too rough with this product as you may damage LED traces or the panel itself.

Parameters:

Dimension: